Talk:Railway roundhouse
![]() | This article is rated C-class on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | ||||||||||||||||||||||
|
|
Reason for roundhouse
[edit]I quote "Early steam locomotives normally travelled forwards only; although reverse operations capabilities were soon built into locomotive mechanisms, the controls were normally optimized for forward travel." I don't see the relevance of this. Surely the point was to make it easier to "get at" individual engines. The equivalent for a carriage workshop was the traverser, though Derby station originally used a series of turntables between each of the tracks. I believe in the early days engines were manhandled in and out of the roundhouse. Chevin 12:12, 27 April 2006 (UTC)
- Normal practice on US railroads was to park locomotives in the roundhouse head-first, that is, with their tenders facing the turntable. This put the parts of the locomotive that normally needed the most work at the most sheltered end of the roundhouse stall tracks. The majority of roundhouses were built to surround turntables.
- When a fire is dumped from the firebox into the facility's ash pit (which was often located very close to the roundhouse), there is normally still enough steam pressure in the locomotive to operate it into the appropriate stall. It did not have to be towed into the roundhouse. Once it arrived in the roundhouse, the hostler would vent any remaining steam pressure and allow the locomotive to cool so the shop employees could work on it. It was common practice on US railroads (at least as far as I can tell in my research) to "shut down" a locomotive in this manner to prepare it for maintenance. To get it out of the roundhouse, the shop employees would light enough of a fire to get enough steam pressure to move the locomotive under its own power to the fueling/watering area in preparation for regular usage; this task could take more than eight hours to perform depending on the amount of pressure needed to move the locomotive. If a locomotive could not be moved under its own power either into or out of a roundhouse, a shop switcher (such as an 0-6-0T) was used. Slambo (Speak) 13:30, 27 April 2006 (UTC).
Disambiguation problem
[edit]When searching for Roundhouse this article is the first to appear. However according to various dictionary definitions Roundhouse refers to a jail cell in most cases. Railway roundhouses only appear as the 4th definition of the word. Perhaps it would be more useful for people entering the word 'roundhouse' if they were directed first to the disambiguation page where there are 10 or 12 roundhouse articles??? Don't know how to do this but perhaps a clever Wiki person does. Mr Susan, Norwich.
Broken links
[edit][Barrow Hill, Derbyshire, England: includes a list of other worldwide roundhouses]was found to be a broken link — Preceding unsigned comment added by Rubi-Wan-Kenobi (talk • contribs) 17:32, 10 April 2015 (UTC)
Requested move 14 March 2018
[edit]- The following is a closed discussion of a requested move. Please do not modify it. Subsequent comments should be made in a new section on the talk page. Editors desiring to contest the closing decision should consider a move review. No further edits should be made to this section.
The result of the move request was: consensus to move the pages, per the discussion below. Dekimasuよ! 05:53, 21 March 2018 (UTC)
– This is not the WP:PRIMARYTOPIC of the term "Roundhouse". It receives only a fraction of the pageviews even among only 10 other uses.[1] It has no greater claim to long-term notability than several of the entries, such as Roundhouse (dwelling), Atlantic roundhouse, Gin gang, and Roundhouse kick. "Roundhouse" should be the disambiguation page. Cúchullain t/c 17:08, 14 March 2018 (UTC)
- Support In ictu oculi (talk) 21:00, 14 March 2018 (UTC)
- Support. Clear absence of a primary topic with this large number of prominent possibilities. bd2412 T 00:55, 15 March 2018 (UTC)
- Support No clear primary topic.ZXCVBNM (TALK) 01:55, 15 March 2018 (UTC)
- The above discussion is preserved as an archive of a requested move. Please do not modify it. Subsequent comments should be made in a new section on this talk page or in a move review. No further edits should be made to this section.
Copyright problem removed
[edit] Prior content in this article duplicated one or more previously published sources. The material was copied from: http://www.warwickshirerailways.com/lms/curzonstreet_shed.htm. Copied or closely paraphrased material has been rewritten or removed and must not be restored, unless it is duly released under a compatible license. (For more information, please see "using copyrighted works from others" if you are not the copyright holder of this material, or "donating copyrighted materials" if you are.)
For legal reasons, we cannot accept copyrighted text or images borrowed from other web sites or published material; such additions will be deleted. Contributors may use copyrighted publications as a source of information, and, if allowed under fair use, may copy sentences and phrases, provided they are included in quotation marks and referenced properly. The material may also be rewritten, providing it does not infringe on the copyright of the original or plagiarize from that source. Therefore, such paraphrased portions must provide their source. Please see our guideline on non-free text for how to properly implement limited quotations of copyrighted text. Wikipedia takes copyright violations very seriously, and persistent violators will be blocked from editing. While we appreciate contributions, we must require all contributors to understand and comply with these policies. Thank you. Snowycats (talk) 05:03, 26 December 2019 (UTC)
Start a discussion about improving the Railway roundhouse page
Talk pages are where people discuss how to make content on Wikipedia the best that it can be. You can use this page to start a discussion with others about how to improve the "Railway roundhouse" page.