Damascus steel
Damascus steel (Arabic: فولاذ دمشقي) refers to the high carbon crucible steel of the blades of historical swords forged using the wootz process in the Near East, characterized by distinctive patterns of banding and mottling reminiscent of flowing water, sometimes in a "ladder" or "rose" pattern. "Damascus steel" developed a high reputation for being tough, resistant to shattering, and capable of being honed to a sharp, resilient edge.[1]
There is now a general agreement that although the term "Damascus steel" traces its roots to the medieval city of Damascus, Syria, perhaps as an early example of branding, that many of the swords themselves, or at least the steel ingots from which they were forged, were imported from Southern India, where the steel making techniques used were first developed. [2][3] or Khorasan, Iran.[4]
Modern steelmakers and metallurgists have studied medieval "Damascus steel" extensively, developing theories on how it was made, and why its use died out by the late 19th century. Modern reproductions can use the term "Damascene", or call themselves "Damascus steel", and many use similar techniques of lamination, banding, and patterning.
Naming
[edit]The origin of the name "Damascus Steel" is contentious. Islamic scholars al-Kindi (full name Abu Ya'qub ibn Ishaq al-Kindi, circa 800 CE – 873 CE) and al-Biruni (full name Abu al-Rayhan Muhammad ibn Ahmad al-Biruni, circa 973 CE – 1048 CE) both wrote about swords and steel made for swords, based on their surface appearance, geographical location of production or forging, or the name of the smith, and each mentions "damascene" or "damascus" swords to some extent.
Drawing from al-Kindi and al-Biruni, there are three potential sources for the term "Damascus" in the context of steel:
- Al-Kindi called swords produced and forged in Damascus as Damascene[5] but it is worth noting that these swords were not described as having a pattern in the steel.
- Al-Biruni mentions a sword-smith called Damasqui who made swords of crucible steel.[6]
The most common explanation is that steel is named after Damascus, the capital city of Syria and one of the largest cities in the ancient Levant. In Damascus, where many of these swords were sold, there is no evidence of local production of crucible steel, though there is evidence of imported steel being forged into swords in Damascus.[7][8] The name could have been an early form of branding.
"Damascus steel" may either refer to swords made or sold in Damascus directly, or simply those with the distinctive surface patterns on the swords, in the same way that Damask fabrics (also named for Damascus),[9][10] got their name.
History
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b9/Damascus_bladesmith.jpg/220px-Damascus_bladesmith.jpg)
Damascus blades were first manufactured in the Near East from ingots of wootz steel that were imported from Southern India (present-day Tamil Nadu and Kerala).[11] Al Kindi states that crucible steel was also made in Khorasan[4] known as Muharrar,[12] in addition to steel that was imported.[5]There was also domestic production of crucible steel outside of India, including Merv (Turkmenistan) and Yazd, Iran.[13][14]
In addition to being made into blades in India (particularly Golconda) and Sri Lanka, wootz / ukku was exported as ingots to various production centers, including Khorasan, and Isfahan, where the steel was used to produce blades, as well as across the Middle East.
The Arabs introduced the wootz steel to Damascus, where a weapons industry thrived.[15] From the 3rd century to the 17th century, steel ingots were being shipped to the Middle East from South India.[16]
Bin iron, which is produced by the Western Barbarians [Xi Fan 西番], is especially fine. The Bao zang lun states: 'There are five kinds of iron ... [The first two come from Hubei and Jiangxi.] Bin iron is produced in Persia [Bosi 波斯]; it is so hard and sharp that it can cut gold and jade ... [The last two kinds come from Shanxi and the Southwest.][17]
Reputation
[edit]The reputation and history of Damascus steel has given rise to many legends, such as the ability to cut through a rifle barrel or to cut a hair falling across the blade. Although many types of modern steel outperform ancient Damascus alloys, chemical reactions in the production process made the blades extraordinary for their time, as Damascus steel was very flexible and very hard at the same time.
Extant examples of patterned crucible steel swords were often tempered in such a way as to retain a bend after being flexed past their elastic limit.[18]
Cultural references and misconceptions
[edit]The blade that Beowulf used to kill Grendel's mother in the story Beowulf was described in some Modern English translations as "damascened".[19][20]
A common misconception is that the steel was hardened by thrusting it six times in the back and thighs of a slave. This originated in an article on page 28 of the Chicago Tribune of November 4, 1894 titled Tempering Damascus Blades. The note asserts that a certain "Prof. von Eulenspiegel" found a scroll "among the ruins of ancient Tyre". "Eulenspiegel" is the name of the legendary prankster of medieval Germany.[21]
In modern culture
[edit]The exceptionally strong fictional Valyrian steel mentioned in George R. R. Martin's book series A Song of Ice and Fire, as well as its television adaptation Game of Thrones, appears to have been inspired by Damascus steel, but with a magic twist.[22] Just like Damascus/Wootz steel, Valyrian steel also seems to be a lost art from an ancient civilization. Unlike Damascus steel, however, Valyrian steel blades require no maintenance and cannot be damaged through normal combat.
Material and mechanical properties
[edit]Verhoeven, Peterson, and Baker completed mechanical characterization of a Damascus sword, performing tensile testing as well as hardness testing.[23] They found that the Damascus steel was somewhat comparable to hot-rolled steel bars with 1.0 wt% carbon with regards to mechanical properties. The average yield strength of 740 MPa was higher than the hot-rolled steel yield strength of 550 MPa, and the average tensile strength of 1070 MPa was higher than the hot-rolled steel tensile strength of 965 MPa.
These results are likely due to the finer pearlite spacing in the Damascus steel, refining the microstructure. The elongation and reduction in area were also slightly higher than the hot-rolled steel averages. Rockwell hardness measurements of the Damascus steel ranged from 62-67. These mechanical properties were consistent with the expected properties from the constituent steels of the material, falling between the upper and lower bounds created by the original steels.
Folding
[edit]Another study investigated the properties of Damascus steel produced from 1075 steel and 15N20 steel, which have approximately equal amounts of carbon, but the 15N20 steel notably has 2 wt% nickel.[24] The 1075 steel is known for high strength, but low toughness, with a pearlitic microstructure, and the 15N20 steel is known for high toughness with a ferritic microstructure. The mechanical properties of the resultant laminate Damascus steel were characterized, in samples with 54 folds in production as well as samples with 250 folds.
Charpy V-notch impact tests showed that the 54-fold samples had an impact toughness of 4.36 J/cm2, while the 250-fold samples had an impact toughness of 5.49 J/cm2. Tensile testing showed that yield strengths and elongations for both samples were similar, at around 475 MPa and 3.2% respectively. However, the maximum strength of the 54-fold samples was notably lower than that of the 250-fold samples (750 MPa vs. 860 MPa). This study showed that the folding process has a significant impact on the mechanical properties of the steel, with increasing toughness as fold numbers increase.[24] This effect is likely due to the thinning and refinement of the microstructure, and to achieve optimal properties, the steel should be folded a few hundred times.
Further studies of Damascus steel created other steels showed similar results, confirming that increasing folds results in greater impact strength and toughness, and extending this finding to be consistent at higher temperatures.[25] They also compare mechanical properties of the Damascus to the original materials, finding that the properties of the Damascus steel lie in between those of the two constituent steels, which is consistent with composite material properties.
Lamination and banding
[edit]The processing and design of the laminations and bands can have a significant effect on mechanical properties as well. Regardless of tempering temperature and the liquid the steel is quenched in, the impact strength of Damascus steel where the impact is perpendicular to the band orientation is significantly higher than the impact strength where the impact is parallel to the band orientation.[26]
This is due to the failure and fracture mechanisms in Damascus steel, where cracks propagate fastest along the interfaces between the two constituent steels. When impact is directed parallel to the bands, cracks are able to propagate easily along the lamination interfaces. When impact is directed perpendicular to the bands, the lamination interfaces are effectively protected, deflecting the cracks and increasing the energy required for cracks to propagate through the material. Band orientation should be chosen to protect against deformation and increase toughness.
Metallurgical process
[edit]Identification of crucible "Damascus" steel based on metallurgical structures [27] is difficult, as crucible steel cannot be reliably distinguished from other types of steel by just one criterion, so the following distinguishing characteristics of crucible steel must be taken into consideration:
- The crucible steel was liquid, leading to a relatively homogeneous steel content with virtually no slag
- The formation of dendrites is a typical characteristic
- The segregation of elements into dendritic and interdendritic regions throughout the sample
By these definitions, modern recreations[7] of crucible steel are consistent with historic examples.
Bin iron: It is produced by the Western Barbarians. Some [types] have a spiral self-patterning, while others have a sesame-seed or snowflake patterning. When a knife or sword is wiped clean and treated with 'gold thread' alum, [the pattern] appears. Its value is greater than silver.[28]
— Cao Zhao
Addition of carbon
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/fb/Cementite_spheroid_aggregation.jpg/400px-Cementite_spheroid_aggregation.jpg)
During the smelting process to obtain wootz steel ingots, woody biomass and leaves are known to have been used as carburizing additives along with certain specific types of iron rich in microalloying elements. These ingots would then be further forged and worked into Damascus steel blades. Research now shows that carbon nanotubes can be derived from plant fibers,[29] suggesting how the nanotubes were formed in the steel. Some experts expect to discover such nanotubes in more relics as they are analyzed more closely.[30]
Wootz was also mentioned to have been made out of a co-fusion process using "shaburqan" (hard steel, likely white cast iron) and "narmahan" (soft steel) by Biruni,[31] both of which were forms of either high- and low-carbon bloomery iron, or low-carbon bloom with cast iron.[32] In such a crucible recipe, no added plant material is necessary to provide the required carbon content, and as such any nanowires of cementite or carbon nanotubes would not have been the result of plant fibers.
Modern research
[edit]A research team in Germany published a report in 2006 revealing nanowires and carbon nanotubes in a blade forged from Damascus steel,[33][30][34] although John Verhoeven of Iowa State University in Ames suggests that the research team which reported nanowires in crucible steel was seeing cementite, which can itself exist as rods, so there might not be any carbon nanotubes in the rod-like structure.[35]
Loss of the technique
[edit]Production of these patterned swords gradually declined, ceasing by around 1900, with the last account being from 1903 in Sri Lanka documented by Coomaraswamy.[27] Some gunsmiths during the 18th and 19th century used the term "damascus steel" to describe their pattern-welded gun barrels, but they did not use crucible steel. Several modern theories have ventured to explain this decline.
• Due to the distance of trade for this steel, a sufficiently lengthy disruption of the trade routes could have ended the production of Damascus steel and eventually led to the loss of the technique.
• The need for key trace impurities of carbide formers such as tungsten, vanadium or manganese within the materials needed for the production of the steel may be absent if this material was acquired from different production regions or smelted from ores lacking these key trace elements.[7]
• The technique for controlled thermal cycling after the initial forging at a specific temperature could also have been lost, thereby preventing the final damask pattern in the steel from occurring.[7][8]
• The disruption of mining and steel manufacture by the British Raj in the form of production taxes and export bans may have also contributed to a loss of knowledge of key ore sources or key techniques.[36]
Modern conjecture
[edit]The discovery of alleged carbon nanotubes in the Damascus steel's composition, if true, could support the hypothesis that wootz production was halted due to a loss of ore sources or technical knowledge, since the precipitation of carbon nanotubes probably resulted from a specific process that may be difficult to replicate should the production technique or raw materials used be significantly altered.[37] The claim that carbon nanowires were found has not been confirmed by further studies, and there is contention among academics about whether the nanowires observed are actually stretched rafts or rods formed out of cementite spheroids.[35]
Modern attempts to duplicate the metal have not always been entirely successful due to differences in raw materials and manufacturing techniques, but several individuals in modern times have successfully produced pattern forming hypereutectoid crucible steel with visible carbide banding on the surface, consistent with original Damascus Steel.[7][8][38]
Modern Reproduction
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f3/DamaszenerKlinge_crop.jpg/220px-DamaszenerKlinge_crop.jpg)
Recreating Damascus steel has been attempted by archaeologists using experimental archaeology. Many have attempted to discover or reverse-engineer the process by which it was made.
Moran: billet welding
[edit]Since the well-known technique of pattern welding—the forge-welding of a blade from several differing pieces—produced surface patterns similar to those found on Damascus blades, some modern blacksmiths were erroneously led to believe that the original Damascus blades were made using this technique. However today, the difference between wootz steel and pattern welding is fully documented and well understood.[39][40][41] Pattern-welded steel has been referred to as "Damascus steel" since 1973 when Bladesmith William F. Moran unveiled his "Damascus knives" at the Knifemakers' Guild Show.[42][43]
This "Modern Damascus" is made from several types of steel and iron slices welded together to form a billet, and currently, the term "Damascus" (although technically incorrect) is widely accepted to describe modern pattern-welded steel blades in the trade.[44] The patterns vary depending on how the smith works the billet.[43] The billet is drawn out and folded until the desired number of layers are formed.[43] To attain a Master Smith rating with the American Bladesmith Society that Moran founded, the smith must forge a Damascus blade with a minimum of 300 layers.[45]
Verhoeven and Pendray: crucible
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7e/Detail_of_Damascus_steel_hair-cutting_shears_from_Japanese_company_Mizutani.jpg/220px-Detail_of_Damascus_steel_hair-cutting_shears_from_Japanese_company_Mizutani.jpg)
J. D. Verhoeven and A. H. Pendray published an article on their attempts[46] to reproduce the elemental, structural, and visual characteristics of Damascus steel.[7] They started with a cake of steel that matched the properties of the original wootz steel from India, which also matched a number of original Damascus swords that Verhoeven and Pendray had access to.
The wootz was in a soft, annealed state, with a grain structure and beads of pure iron carbide in cementite spheroids, which resulted from its hypereutectoid state. Verhoeven and Pendray had already determined that the grains on the surface of the steel were grains of iron carbide—their goal was to reproduce the iron carbide patterns they saw in the Damascus blades from the grains in the wootz.
Although such material could be worked at low temperatures to produce the striated Damascene pattern of intermixed ferrite/pearlite and cementite spheroid bands in a manner identical to pattern-welded Damascus steel, any heat treatment sufficient to dissolve the carbides was thought to permanently destroy the pattern. However, Verhoeven and Pendray discovered that in samples of true Damascus steel, the Damascene pattern could be recovered by thermally cycling and thermally manipulating the steel at a moderate temperature.[47]
They found that certain carbide forming elements, one of which was vanadium, did not disperse until the steel reached higher temperatures than those needed to dissolve the carbides. Therefore, a high heat treatment could remove the visual evidence of patterning associated with carbides but did not remove the underlying patterning of the carbide forming elements.
A subsequent lower-temperature heat treatment, at a temperature at which the carbides were again stable, could recover the structure by the binding of carbon by those elements and causing the segregation of cementite spheroids to those locations.
Thermal cycling after forging allows for the aggregation of carbon onto these carbide formers, as carbon migrates much more rapidly than the carbide formers. Progressive thermal cycling leads to the coarsening of the cementite spheroids via Ostwald ripening.
Anosov, Wadsworth and Sherby: bulat
[edit]In Russia, chronicles record the use of a material known as bulat steel to make highly valued weapons, including swords, knives, and axes. Tsar Michael of Russia reportedly had a bulat helmet made for him in 1621. The exact origin or the manufacturing process of the bulat is unknown, but it was likely imported to Russia via Persia and Turkestan, and it was similar and possibly the same as Damascus steel. Pavel Petrovich Anosov successfully reproduced the process in the mid-19th century. Wadsworth and Sherby also researched [8] the reproduction of bulat steel and published their results in 1980.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/29/Kristallstruktur_Zementit.png/220px-Kristallstruktur_Zementit.png)
Additional research
[edit]A team of researchers based at the Technical University of Dresden that used x-rays and electron microscopy to examine Damascus steel discovered the presence of cementite nanowires[48] and carbon nanotubes.[33] Peter Paufler, a member of the Dresden team, says that these nanostructures are a result of the forging process.[30][49]
Sanderson proposes that the process of forging and annealing accounts for the nano-scale structures.[49]
German researchers have investigated the possibility of manufacturing high-strength Damascus steel through laser additive manufacturing techniques as opposed to the traditional folding and forging.[50] The resulting samples exhibited superior mechanical properties to ancient Damascus steels, with a tensile strength of 1300 MPa and 10% elongation.
In gun making
[edit]Prior to the early 20th century, all shotgun barrels were forged by heating narrow strips of iron and steel and shaping them around a mandrel.[51][52] This process was referred to as "laminating" or "Damascus".[51][52] These types of barrels earned a reputation for weakness and were never meant to be used with modern smokeless powder, or any kind of moderately powerful explosive.[52] Because of the resemblance to Damascus steel, higher-end barrels were made by Belgian and British gun makers.[51][52] These barrels are proof marked and meant to be used with light pressure loads.[51] Current gun manufacturers make slide assemblies and small parts such as triggers and safeties for Colt M1911 pistols from powdered Swedish steel resulting in a swirling two-toned effect; these parts are often referred to as "Stainless Damascus".[53]
See also
[edit]- Toledo steel
- Crucible steel
- Wootz steel
- Noric steel
- Bulat steel
- Tamahagane steel
- Mokume-gane
- Laminated steel blade
References
[edit]- ^ Figiel, Leo S. (1991). On Damascus Steel. Atlantis Arts Press. pp. 10–11. ISBN 978-0-9628711-0-8.
- ^ https://www.forbesindia.com/blog/technology/the-mystery-of-the-damascus-sword-and-indias-materials-heritage/
- ^ The Sword and the Crucible: A History of the Metallurgy of European Swords Up to the 16th Century, Alan R. Williams (2012). The Sword and the Crucible. Brill. p. 30. ISBN 9789004227835.
{{cite book}}
: CS1 maint: numeric names: authors list (link) - ^ a b Bronson, Bennet (1986). "The making and selling of wootz, a crucible steel of India". Archeomaterials. 1: 1. S2CID 111606783.
- ^ a b Hassan, A. Y. (1978). "Iron and Steel Technology in Medieval Arabic Sources". Journal for the History of Arabic Science. 2: 31–52.
- ^ Bīrūnī, Muḥammad ibn Aḥmad (1989). Kitāb al-jamāhir fī maʻrifat al-jawāhir [The book most comprehensive in knowledge on precious stones: al-Beruni's book on mineralogy]. Islamabad: Pakistan Hijra Council. ISBN 969-8016-28-7. OCLC 25412863.
- ^ a b c d e f Verhoeven, J.D.; Pendray, A.H.; Dauksch, W.E. (1998). "The key role of impurities in ancient damascus steel blades". Journal of Metallurgy. 50 (9): 58. Bibcode:1998JOM....50i..58V. doi:10.1007/s11837-998-0419-y. S2CID 135854276. Archived from the original on 2019-08-29. Retrieved 2002-11-04.
- ^ a b c d Wadsworth, Jeffrey; Sherby, Oleg D. (1980). "On the Bulat – Damascus Steel Revisited". Prog. Mater. Sci. 25 (1): 35–68. doi:10.1016/0079-6425(80)90014-6.
- ^ Goddard, Wayne (2000). The Wonder of Knifemaking. Iola, WI: Krause Publications. pp. 137–145. ISBN 978-0-87341-798-3. Archived from the original on April 1, 2017.
- ^ Williams, Alan R. (2003). The knight and the blast furnace: a history of the metallurgy of armour in the Middle Ages & the early modern period. History of warfare. Vol. 12. Leiden: BRILL. pp. 11–15. ISBN 978-90-04-12498-1.
- ^ Pacey, Arnold (1991). Technology in World Civilization: A Thousand-year History. MIT Press. p. 80. ISBN 978-0-262-66072-3.
- ^ Allan, James W.; Gilmour, Brian J. J.; Studies, British Institute of Persian (2000). Persian Steel: The Tanavoli Collection. Oxford University Press for the Board of the Faculty of Oriental Studies, University of Oxford and the British Institute of Persian Studies. ISBN 978-0-19-728025-6.
- ^ Alipour, Rahil; Rehren, Thilo (2015-02-15). "Persian Pulād Production: Chāhak Tradition". Journal of Islamic Archaeology. 1 (2): 231–261. doi:10.1558/jia.v1i2.24174. ISSN 2051-9710.
- ^ "Early Islamic manufacture of crucible steel at Merv, Turkmenistan". www.academia.edu. Retrieved 2020-09-10.
- ^ Sharada Srinivasan; Srinivasa Ranganathan (2004). India's Legendary Wootz Steel: An Advanced Material of the Ancient World. National Institute of Advanced Studies. OCLC 82439861. Archived from the original on 2019-02-11. Retrieved 2014-08-12.
- ^ Sinopoli, Carla M. (2003). The Political Economy of Craft Production: Crafting Empire in South India, c. 1350–1650. Cambridge University Press. p. 192. ISBN 0-521-82613-6.
- ^ Wagner 2008, p. 269.
- ^ Becker, Otto Matthew (1910). High-speed steel: the development, nature, treatment, and use of high-speed steels, together with some suggestions as to the problems involved in their use. New York: McGraw-Hill. pp. 10–14.
- ^ Osborn, Marijane (2002). ""The Wealth They Left Us": Two Women Author Themselves through Others' Lives in Beowulf". heroicage.org. Department of English, University of California at Davis. Retrieved 6 July 2021.
- ^ "Beowulf: Lines 1399 to 1799" [Lines 1655 - 1693 (Robert Fletcher, trans.; Sandy Eckard, pres.)]. As.wvu.edu. pp. 1665–1670. Retrieved 16 August 2021.
- ^ Alter, Stephen C. (2017). "On Slaves and Silk Hankies Seeking Truth in Damascus Steel" (PDF). Retrieved 29 December 2023.
- ^ The Daily Telegraph (21 June 2017). "There's a real-life equivalent to Valyrian Steel". The Telegraph. Archived from the original on 19 September 2018. Retrieved 19 September 2018.
- ^ Peterson, D.T.; Baker, H.H.; Verhoeven, J.D. (June 1990). "Damascus steel, characterization of one Damascus steel sword". Materials Characterization. 24 (4): 355–374. doi:10.1016/1044-5803(90)90042-i. ISSN 1044-5803.
- ^ a b Özkan, Furkan; Kirdan, Hakan; Kara, İsmail Hakkı; Hüsem, Fazıl; Özcelik, Sait; Akinay, Yüksel; Çug, Harun; Sun, Yavuz; Ahlatci, Hayrettin (2014-10-01). "Mechanical Properties of Pattern Welded 1075-15N20 Steels*". Materials Testing. 56 (10): 897–900. doi:10.3139/120.110649. ISSN 2195-8572.
- ^ Verhoeven, John D. (August 2002). "Genuine Damascus steel: a type of banded microstructure in hypereutectoid steels". Steel Research. 73 (8): 356–365. doi:10.1002/srin.200200221.
- ^ Černý, Michal; Filípek, Josef; Mazal, Pavel; Dostál, Petr (2013-04-08). "Basic mechanical properties of layered steels". Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis. 61 (1): 25–38. doi:10.11118/actaun201361010025.
- ^ a b Feuerbach, Anna Marie. (2002). Crucible steel in Central Asia: production, use, and origins. University of London. OCLC 499391952.
- ^ Wagner 2008, p. 271.
- ^ Goodell B, Xie X, Qian Y, Daniel G, Peterson M, Jellison J (2008). "Carbon nanotubes produced from natural cellulosic materials". Journal of Nanoscience and Nanotechnology. 8 (5): 2472–4. doi:10.1166/jnn.2008.235. PMID 18572666.
- ^ a b c "Legendary Swords' Sharpness, Strength From Nanotubes, Study Says". National Geographic. 2010-10-28. Archived from the original on 18 November 2006. Retrieved 19 November 2006.
- ^ Hoyland, Robert. Islamic Swords: ch 3: Kindi on Swords commentary.
- ^ Feuerbach, Ann; Merkel, John F.; Griffiths, Dafydd R. (1996). "Production of Crucible Steel by Co-Fusion: Archaeometallurgical Evidence from the Ninth-Early Tenth Century at the Site of Merv, Turkmenistan". MRS Proceedings. 462. doi:10.1557/PROC-462-105.
- ^ a b Reibold, M.; Paufler, P.; Levin, A. A.; Kochmann, W.; Pätzke, N.; Meyer, D. C. (2006). "Materials: Carbon nanotubes in an ancient Damascus sabre". Nature. 444 (7117): 286. Bibcode:2006Natur.444..286R. doi:10.1038/444286a. PMID 17108950. S2CID 4431079.
- "Secret's out for Saracen sabres". New Scientist. 8 November 2006.
- ^ Fountain, Henry (2006-11-28). "Antique Nanotubes". The New York Times. Retrieved 2011-11-13.
- ^ a b Sanderson, Katharine (2006-11-15). "Sharpest cut from nanotube sword". Nature: news061113–11. doi:10.1038/news061113-11. ISSN 0028-0836. S2CID 136774602.
- ^ Balasubramaniam, R. (2008). "Metallurgy of Ancient Indian Iron and Steel". Encyclopaedia of the History of Science, Technology, and Medicine in Non-Western Cultures. pp. 1608–1613. doi:10.1007/978-1-4020-4425-0_9765. ISBN 978-1-4020-4559-2.
- ^ Milgrom, Lionel (15 November 2006). "Carbon nanotubes: Saladin's secret weapon".
- ^ "John Verhoeven: Mystery of Damascus Steel Swords Unveiled". Archived from the original on 11 August 2018.
- ^ Maryon, Herbert (1948). "A Sword of the Nydam Type from Ely Fields Farm, near Ely". Proceedings of the Cambridge Antiquarian Society. XLI: 73–76. doi:10.5284/1034398.
- ^ Maryon, Herbert (February 1960). "Pattern-Welding and Damascening of Sword-Blades—Part 1: Pattern-Welding". Studies in Conservation. 5 (1): 25–37. doi:10.2307/1505063. JSTOR 1505063.
- ^ Maryon, Herbert (May 1960). "Pattern-Welding and Damascening of Sword-Blades—Part 2: The Damascene Process". Studies in Conservation. 5 (2): 52–60. doi:10.2307/1504953. JSTOR 1504953.
- ^ Lewis, Jack; Roger Combs (1992). Gun digest book of knives. DBI. pp. 58–64. ISBN 978-0-87349-129-7.
- ^ a b c Kertzman, Joe (2007). Art of the Knife. Krause Publications. pp. 224–6. ISBN 978-0-89689-470-9.
- ^ Loveless, Robert; Barney, Richard (1995) [1977]. How to Make Knives. Knife World Publications. p. 169. ISBN 0-695-80913-X.
- ^ "ABS Testing Rules and Guidelines for the Master Smith Rating" (PDF). Archived from the original (PDF) on 2018-10-03. Retrieved 2011-03-12.
- ^ US 5185044, Verhoeven, John D. & Pendray, Alfred H., "Method of making "Damascus" blades", published 1992-03-09
- ^ Verhoeven, J. D.; Pendray, A. H.; Dauksch, W. E.; Wagstaff, S. R. (2018-07-01). "Damascus Steel Revisited". JOM. 70 (7): 1331–1336. Bibcode:2018JOM....70g1331V. doi:10.1007/s11837-018-2915-z. ISSN 1543-1851. S2CID 139673807.
- ^ Kochmann, W.; Reibold, Marianne; Goldberg, Rolf; Hauffe, Wolfgang; Levin, Alexander A; Meyer, Dirk C; Stephan, Thurid; Müller, Heide; Belger, André; Paufler, Peter (2004). "Nanowires in ancient Damascus steel". Journal of Alloys and Compounds. 372 (1–2): L15–L19. doi:10.1016/j.jallcom.2003.10.005. ISSN 0925-8388.
Levin, A. A.; Meyer, D. C.; Reibold, M.; Kochmann, W.; Pätzke, N.; Paufler, P. (2005). "Microstructure of a genuine Damascus sabre" (PDF). Crystal Research and Technology. 40 (9): 905–916. doi:10.1002/crat.200410456. S2CID 96560374. Archived from the original (PDF) on 2006-03-15. - ^ a b Sanderson, K. (2006). "Sharpest cut from nanotube sword". Nature. 444: 286. doi:10.1038/news061113-11. S2CID 136774602.
- ^ Kürnsteiner, Philipp; Wilms, Markus Benjamin; Weisheit, Andreas; Gault, Baptiste; Jägle, Eric Aimé; Raabe, Dierk (June 2020). "High-strength Damascus steel by additive manufacturing". Nature. 582 (7813): 515–519. doi:10.1038/s41586-020-2409-3. ISSN 1476-4687.
- ^ a b c d Simpson, Layne (2003). Shotguns & Shotgunning. Krause Publications. p. 256. ISBN 978-0-87349-567-7.
- ^ a b c d Matunas, Edward A. (2003). Do-It-Yourself Gun Repair. Woods N' Water. p. 240. ISBN 978-0-9722804-2-6.
- ^ Hopkins, Cameron (2000). "Damascus Knight .45". American Handgunner Magazine. 20 (4): 128.
External links
[edit]- "Damascene Technique in Metal Working"
- Verhoeven, J.D.; Pendray, A.H.; Dauksch, W.E. (September 2004). "The continuing study of damascus steel: Bars from the Alwar Armory". JOM. 56 (9): 17–20. Bibcode:2004JOM....56i..17V. doi:10.1007/s11837-004-0193-4. S2CID 137555792.
- Verhoeven, J.D. (2007). "Pattern Formation in Wootz Damascus Steel Swords and Blades" (PDF). Indian Journal of History of Science. 42 (4): 559–574. Archived (PDF) from the original on 2017-12-12.
- John Verhoeven: Mystery of Damascus Steel Swords Unveiled
- Wagner, Donald B. (2008), Science and Civilization in China Volume 5-11: Ferrous Metallurgy, Cambridge University Press
- Loades, Mike; Pendray, Al (21 November 2017). The Secrets of Wootz Damascus Steel. YouTube. Archived from the original on 2021-11-17.
- US 5185044, Verhoeven, J.D. & Pendray, A.H., "Method of making "Damascus" blades", published 9 February 1993