Jump to content

Sewn boat

From Wikipedia, the free encyclopedia
Halsnøy boat, detail of the bow.

A sewn boat is a type of wooden boat which is clinker built with its planks sewn, stitched, tied, or bound together with tendons or flexible wood, such as roots and willow branches.[1] Sewn boat construction techniques were used in many parts of the world prior to the development of metal fasteners, and continued to be used long after that time for small boats to reduce construction costs where metal fasteners were too expensive.[2]

Name and similar techniques

[edit]

Although well established, the sewn boat name is somewhat misleading since it suggests textile or leather skin construction, as often found in kayaks. Some[who?] have proposed to use laced boats (Ge. geschnürte Boote) instead. A modern plywood construction method that resembles sewn boats is the stitch and glue method; in this technique plywood panels are stitched together, often with wire, and the seams are reinforced with fiberglass composite; the stitching may then be removed or may remain in place. Also related is the treenailed boat.

Lashed lug construction is used in the distinctive maritime technology of Austronesian peoples.[3]

Construction

[edit]

Sewn boats start with the construction of the hull, or outside "shell" of the boat, rather than the frame, resulting in a monocoque type of structure. Carefully shaped planks are connected at the edges, usually in the clinker style, with overlapping sections which are sewn together. As the planks are placed together, the hull begins to bend into the desired shape. The resulting structure is highly flexible. Internal framing may be added to the planks after they are sewn in, providing additional rigidity.

While wooden pegs (often called treenails) can be used to fasten thicker clinker planks, this technique only works if the planks are thick enough to hold the pegs. Because of this, large ships were often built using pegs, while smaller boats would use sewn planks.[4]

History

[edit]
The reconstructed "solar barque" of Khufu, Egypt, c. 2500 BC
Ferriby boat model and replica tools, Britain, c. 2000 BC

The earliest known example of a sewn boat is the 40+ metres long "Solar barque" or funerary boat on show near the Gizeh pyramid, in Egypt; it dates back from c. 2500 BC. The sewn construction was a natural step when coming from raft or reed boatbuilding, which dates from some thousands of years before that. In other parts of the world, the oldest sewn craft comes from North Ferriby, where one sample (called F3) mass-spectrometry dates to 2030 BC. Later finds include some early Greek ships. The oldest Nordic find is the Hjortspring boat in Denmark (c 300 BC). In Finland, Russia, Karelia and Estonia small sewn boats have been constructed more recently; until the 1920s in poor areas of Russia.[5]

Sewn construction is used in the various forms of the Austronesian "proas" of the Indo-Pacific (which also used the lashed-lug techniques)[3] and the Middle Eastern and South Asian dhow native to the Red Sea, Persian Gulf, and Indian Ocean.[6][7] Despite their proximity and similarity, they differ markedly from each other, indicating that they developed independently. Austronesian boat-sewing techniques are discontinuous and are only visible from the inside surfaces of the hull, while South Asian and Middle Eastern boat-sewing techniques are visible in both the exterior and interior of the hull and are continuous.[8]

Comparison with other traditions

[edit]

Though the sewn boat technique (but not the lashed lugs) is also used for boats in the western Indian Ocean traditions, it differs in that the stitching in Austronesian boats are discontinuous and only visible from the inside of the hull. This indicates that the sewn boat techniques of the Indian Ocean and Austronesia are not culturally-linked and developed independent of each other. The planks of ancient Austronesian ships were originally joined together using only the sewn boat technique. However, the development of metallurgy in Maritime Southeast Asia in the last two thousand years resulted in the replacement of the sewing technique with internal dowels, as well as increasing use of metal nails.[9][10]

Examples of sewn boats

[edit]

See also

[edit]

References

[edit]
  1. ^ A.H.J. Prins, 1986. Handbook of Sewn Boats: The Ethnography and Archaeology of Archaic Plank-Built Craft. Maritime Monographs and Reports No.59. Greenwich, London: The National Maritime Museum.(187 p’s)
  2. ^ McGrail S. and Kentley, E., 1985. Sewn plank boats: Archaeological and Ethnographic papers based on those presented to a conferences at Greenwich in November 1984. National Maritime Museum, Greenwich
  3. ^ a b Horridge, Adrian (2006). "The Austronesian Conquest of the Sea - Upwind". In Bellwood, Peter; Fox, James J.; Tryon, Darrell (eds.). The Austronesians: Historical and Comparative Perspectives. ANU E Press. pp. 143–160. ISBN 9781920942854.
  4. ^ McCarthy, M., 2005. Ships' fastenings: from sewn boat to steamship. Texas A&M University Press. ISBN 1-58544-451-0
  5. ^ e.g. Litwin, J., 1985. Sewn Craft of the 19th Century in the European part of Russia. In McGrail S and Kentley: 253-268.h
  6. ^ Ralph K. Pedersen. "Traditional Arabic watercraft and the ark of the Gilgamesh epic: interpretations and realizations." Proceedings of the Seminar for Arabic Studies 34 (2004) 231-238, p.231.
  7. ^ Jett, Stephen C. (2017). Ancient Ocean Crossings: Reconsidering the Case for Contacts with the Pre-Columbian Americas. University of Alabama Press. pp. 196–205. ISBN 9780817319397.
  8. ^ Pham, Charlotte Minh-Hà L. (2012). Asian Shipbuilding Technology (PDF). UNESCO. ISBN 978-92-9223-414-0.
  9. ^ Pham, Charlotte Minh-Hà L. (2012). Asian Shipbuilding Technology (PDF). UNESCO. ISBN 978-92-9223-414-0.
  10. ^ Horridge, Adrian (2006). "The Austronesian Conquest of the Sea - Upwind". In Bellwood, Peter; Fox, James J.; Tryon, Darrell (eds.). The Austronesians: Historical and Comparative Perspectives. ANU E Press. pp. 143–160. doi:10.22459/a.09.2006.07. ISBN 9781920942854.
[edit]