Jump to content

Perchloric acid

From Wikipedia, the free encyclopedia
Perchloric acid
Perchloric acid Hydroxidotrioxidochlorine
Perchloric acid
Hydroxidotrioxidochlorine
Perchloric acid ydroxidotrioxidochlorine
Perchloric acid
ydroxidotrioxidochlorine
Names
Systematic IUPAC name
Perchloric acid
Other names
Hyperchloric acid[1]
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.028.648 Edit this at Wikidata
EC Number
  • 231-512-4
RTECS number
  • SC7500000
UNII
UN number 1873
  • InChI=1S/ClHO4/c2-1(3,4)5/h(H,2,3,4,5) checkY
    Key: VLTRZXGMWDSKGL-UHFFFAOYSA-N checkY
  • InChI=1/ClHO4/c2-1(3,4)5/h(H,2,3,4,5)
    Key: VLTRZXGMWDSKGL-UHFFFAOYAD
  • O[Cl+3]([O-])([O-])[O-]
Properties
HClO4
Molar mass 100.46 g/mol
Appearance colorless liquid
Odor odorless
Density 1.768 g/cm3
Melting point −17 °C (1 °F; 256 K) (72% aqueous solution)[2]
−112 °C (anhydrous)
Boiling point 203 °C (397 °F; 476 K) (azeotrope)[2]
Miscible
Acidity (pKa) −15.2 (±2.0);[3] ≈ −10
Conjugate base Perchlorate
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Powerful oxidizer, highly corrosive
GHS labelling:
GHS03: Oxidizing GHS05: Corrosive GHS07: Exclamation mark GHS08: Health hazard
Danger
H271, H290, H302, H314, H373
P210, P280, P303+P361+P353, P304+P340, P305+P351+P338, P310, P371, P375, P380
NFPA 704 (fire diamond)
Flash point Non-flammable
Safety data sheet (SDS) ICSC 1006
Related compounds
Related compounds
Hydrochloric acid
Hypochlorous acid
Chlorous acid
Chloric acid
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Perchloric acid is a mineral acid with the formula HClO4. It is an oxoacid of chlorine. Usually found as an aqueous solution, this colorless compound is a stronger acid than sulfuric acid, nitric acid and hydrochloric acid. It is a powerful oxidizer when hot, but aqueous solutions up to approximately 70% by weight at room temperature are generally safe, only showing strong acid features and no oxidizing properties. Perchloric acid is useful for preparing perchlorate salts, especially ammonium perchlorate, an important rocket fuel component. Perchloric acid is dangerously corrosive and readily forms potentially explosive mixtures.[4]

History

[edit]

Perchloric acid was first synthesized (together with potassium perchlorate) by Austrian chemist Friedrich von Stadion [de] and called "oxygenated chloric acid" in mid-1810s. French pharmacist Georges-Simon Serullas introduced the modern designation along with discovering its solid monohydrate (which he, however, mistook for an anhydride).[5]

Production

[edit]

Perchloric acid is produced industrially by two routes. The traditional method exploits the high aqueous solubility of sodium perchlorate (209 g/100 ml of water at room temperature). Treatment of such solutions with hydrochloric acid gives perchloric acid, precipitating solid sodium chloride:

NaClO4 + HCl → NaCl + HClO4

The concentrated acid can be purified by distillation. The alternative route, which is more direct and avoids salts, entails anodic oxidation of aqueous chlorine at a platinum electrode.[6][7]

Laboratory preparations

[edit]

It can be distilled from a solution of potassium perchlorate in sulfuric acid.[8] Treatment of barium perchlorate with sulfuric acid precipitates barium sulfate, leaving perchloric acid. It can also be made by mixing nitric acid with ammonium perchlorate and boiling while adding hydrochloric acid. The reaction gives nitrous oxide and perchloric acid due to a concurrent reaction involving the ammonium ion and can be concentrated and purified significantly by boiling off the remaining nitric and hydrochloric acids.

Properties

[edit]

Anhydrous perchloric acid is an unstable oily liquid at room temperature. It forms at least five hydrates, several of which have been characterized crystallographically. These solids consist of the perchlorate anion linked via hydrogen bonds to H2O and H3O+ centers.[9] An example is hydronium perchlorate. Perchloric acid forms an azeotrope with water, consisting of about 72.5% perchloric acid. This form of the acid is stable indefinitely and is commercially available. Such solutions are hygroscopic. Thus, if left open to the air, concentrated perchloric acid dilutes itself by absorbing water from the air.

Dehydration of perchloric acid gives the anhydride dichlorine heptoxide:[10]

2 HClO4 + P4O10 → Cl2O7 + H2P4O11

Uses

[edit]

Perchloric acid is mainly produced as a precursor to ammonium perchlorate, which is used in rocket fuel. The growth in rocketry has led to increased production of perchloric acid. Several million kilograms are produced annually.[6] Perchloric acid is one of the most proven materials for etching of liquid crystal displays and critical electronics applications as well as ore extraction and has unique properties in analytical chemistry.[11] Additionally it is a useful component in etching of chrome.[12]

As an acid

[edit]

Perchloric acid, a superacid, is one of the strongest Brønsted–Lowry acids. That its pKa is lower than −9 is evidenced by the fact that its monohydrate contains discrete hydronium ions and can be isolated as a stable, crystalline solid, formulated as [H3O+][ClO
4
].[13] The most recent estimate of its aqueous pKa is −15.2±2.0.[3] It provides strong acidity with minimal interference because perchlorate is weakly nucleophilic (explaining the high acidity of HClO4). Other acids of noncoordinating anions, such as fluoroboric acid and hexafluorophosphoric acid are susceptible to hydrolysis, whereas perchloric acid is not. Despite hazards associated with the explosiveness of its salts, the acid is often preferred in certain syntheses.[14] For similar reasons, it is a useful eluent in ion-exchange chromatography. It is also used in electropolishing or the etching of aluminium, molybdenum, and other metals.

In geochemistry, perchloric acid aids in the digestion of silicate mineral samples for analysis, and also for complete digestion of organic matter.[15]

Safety

[edit]

Given its strong oxidizing properties, perchloric acid is subject to extensive regulations as it can react violently with metals and flammable substances such as wood, plastics, and oils.[16] Work conducted with perchloric acid must be conducted in fume hoods with a wash-down capability to prevent accumulation of oxidisers in the ductwork.

On February 20, 1947 in Los Angeles, California, 17 people were killed and 150 injured in the O'Connor Plating Works disaster. A bath, consisting of over 1000 litres of 75% perchloric acid and 35% acetic anhydride by volume which was being used to electro-polish aluminium furniture, exploded. Organic compounds were added to the overheating bath when an iron rack was replaced with one coated with cellulose acetobutyrate (Tenit-2 plastic). A few minutes later the bath exploded.[17][18] The O'Connor Electro-Plating plant, 25 other buildings, and 40 automobiles were destroyed, and 250 nearby homes were damaged.

See also

[edit]

References

[edit]
  1. ^ Fomon, S. (1920). Medicine and the Allied Sciences. D. Appleton. p. 148.
  2. ^ a b "Safety (MSDS) data for perchloric acid, 70%". msds.chem.ox.ac.uk. 2 July 2008. Archived from the original on 2 July 2008. Retrieved 24 February 2022.
  3. ^ a b Trummal, Aleksander; Lipping, Lauri; Kaljurand, Ivari; Koppel, Ilmar A.; Leito, Ivo (6 May 2016). "Acidity of Strong Acids in Water and Dimethyl Sulfoxide". The Journal of Physical Chemistry A. 120 (20). American Chemical Society (ACS): 3663–3669. Bibcode:2016JPCA..120.3663T. doi:10.1021/acs.jpca.6b02253. ISSN 1089-5639. PMID 27115918. S2CID 29697201.
  4. ^ "Perchloric Acid | Environmental Health & Safety | Michigan State University". ehs.msu.edu. Retrieved 2023-11-02.
  5. ^ Schilt, Alfred A. (1979). Perchloric acid and perchlorates. The G. Frederick Smith Chemical Company. p. 1.
  6. ^ a b Helmut Vogt, Jan Balej, John E. Bennett, Peter Wintzer, Saeed Akbar Sheikh, Patrizio Gallone "Chlorine Oxides and Chlorine Oxygen Acids" in Ullmann's Encyclopedia of Industrial Chemistry 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a06_483.
  7. ^ Müler, W.; Jönck, P. (1963). "Herstellung von Perchlorsäure durch anodische Oxydation von Chlor". Chemie Ingenieur Technik. 35 (2): 78. doi:10.1002/cite.330350203.; German patent DE1031288B; US patent US2846383A.
  8. ^ Schmeisser, M. (1963). "Perchloric Acid". In Brauer, G. (ed.). Handbook of Preparative Inorganic Chemistry. Vol. 2 (2nd ed.). NY,NY: Academic Press. p. 318.
  9. ^ Almlöf, J.; Lundgren, J. O.; Olovsson, I. (15 May 1971). "Hydrogen bond studies. XLV. The crystal structure of HClO4.2.5H2O". Acta Crystallographica Section B: Structural Crystallography and Crystal Chemistry. 27 (5). International Union of Crystallography (IUCr): 898–904. doi:10.1107/s0567740871003236. ISSN 0567-7408.
  10. ^ Holleman, Arnold F.; Wiberg, Egon (2001). Inorganic chemistry. Translated by Mary Eagleson, William Brewer. San Diego: Academic Press. p. 464. ISBN 0-12-352651-5.
  11. ^ "Perchloric Acid". GFS chemicals. Archived from the original on 2015-01-31. Retrieved 2014-01-14.
  12. ^ "Metal Etching". Thayer School of Engineering.
  13. ^ Kathleen Sellers; Katherine Weeks; William R. Alsop; Stephen R. Clough; Marilyn Hoyt; Barbara Pugh (2006). Perchlorate: environmental problems and solutions. CRC Press. p. 16. ISBN 0-8493-8081-2.
  14. ^ A. T. Balaban, C. D. Nenitzescu, K. Hafner and H. Kaiser (1973). "2,4,6-Trimethylpyrilium Perchlorate". Organic Syntheses{{cite journal}}: CS1 maint: multiple names: authors list (link); Collected Volumes, vol. 5, p. 1106.
  15. ^ "Perchloric Acid | Environmental Health & Safety | Michigan State University". ehs.msu.edu. Retrieved 2024-09-02.
  16. ^ "Materials Safety Data Sheet - Perchloric Acid, 60%, GR" (PDF). emd chemicals. 2003. Archived from the original (PDF) on 24 March 2012. Retrieved 24 February 2022.
  17. ^ R. C. Nester; G. F. Vander Voort (1992). Safety in the Metallographic Laboratory. ASTM Standardization News. p. 34.
  18. ^ "CALIFORNIA: The Amazing Brew". Time.com. March 3, 1947.
[edit]